CEMENT FEEDING PUMP



SYSTEM PERFORMANCE OBJECTIVE:-
HACHI PILLAR proposes to furnish our conveying system for the purpose of conveying cement (Bulk Density = 1.0 to 1.4 gm/cc). The overall conveying distances horizontal will be 5 Mtr and Vertical will be 15 Mtr. approximately. Conveying rate will be around 15 – 18 Ton/Hr. depending upon the characteristic of material. One control panel and Power Source (blower) is proposed here with the offer.
HACHI PILLAR proposes to furnish our conveying system for the purpose of conveying cement (Bulk Density = 1.0 to 1.4 gm/cc). The overall conveying distances horizontal will be 5 Mtr and Vertical will be 15 Mtr. approximately. Conveying rate will be around 15 – 18 Ton/Hr. depending upon the characteristic of material. One control panel and Power Source (blower) is proposed here with the offer.
SYSTEM FEATURES:-
- You have to make the arrangement to dump the cement in the powder form in to the feed hopper.
- Convey line is connected with high capacity blower to generate the sufficient force to convey the material into the storage silo.
- The system will have a facility to convey the loose cement / fly ash which comes into the bulker.
- ROOTS INDIA COMPANY pre-engineered screw pump and its components are ready for installation and require minimum attention for start-up.
- Cement will be transferred inside the tubing without any obstruction to the Silo. The system proposed herein is totally enclosed and sealed.
UTILITIES REQUIRED :-
440 Volts, III Phase, 50 Hz, 80 HP Electrical Power for the power source (50.0 HP for Power Source (Blower) & 30.0 HP for Screw Motor)
BLOWER TECHNICAL DATA
a | aa |
---|---|
MODEL | RIC – 022 |
CONSTRCUTION | CI |
COOLING | AIR COOELD |
CAPACITY | 900 M3/HR |
PRESSURE | 09 KG/CM2 |
SPEED | 1535 RPM |
POWER | 28 KW |
REC.MOTOR | 50 HP/1450 RPM |
CONVEYING TECHNICAL DATA
ITEM DESCRIPTION | SPECIFICATION |
---|---|
OUT PUT CAPACITY | 15 to 18 TPH |
FEED HOPER CAPACITY | 500 KG |
SCREW | TOUGNED |
SCREW MOTOR | 30 HP / 1450 RPM |
TWIN LOBE BLOWER | RIC – 022 |
BLOWER MOTOR | 50 HP / 1450 RPM |
STRUCTURE | FIXED |